Comments

Document Feedback - Review and Comment

Step 1 of 4: Comment on Document

How to make a comment?

1. Use this Protected Document to open a comment box for your chosen Section, Part, Heading or clause.

2. Type your feedback into the comments box and then click "save comment" button located in the lower-right of the comment box.

3. Do not open more than one comment box at the same time.

4. When you have finished making comments proceed to the next stage by clicking on the "Continue to Step 2" button at the very bottom of this page.

 

Important Information

During the comment process you are connected to a database. Like internet banking, the session that connects you to the database may time-out due to inactivity. If you do not have JavaScript running you will recieve a message to advise you of the length of time before the time-out. If you have JavaScript enabled, the time-out is lengthy and should not cause difficulty, however you should note the following tips to avoid losing your comments or corrupting your entries:

  1. DO NOT jump between web pages/applications while logging comments.

  2. DO NOT log comments for more than one document at a time. Complete and submit all comments for one document before commenting on another.

  3. DO NOT leave your submission half way through. If you need to take a break, submit your current set of comments. The system will email you a copy of your comments so you can identify where you were up to and add to them later.

  4. DO NOT exit from the interface until you have completed all three stages of the submission process.

 

Masters Degree (Coursework) (including models for 160,120,80) - Awards and Programs Schedule

Schedule of the Awards and Graduation Policy.

Section 1 - Introduction

(1) As a higher education provider authorised to self-accredit, the University of Newcastle (University) is responsible under the Tertiary Education Quality and Standards Agency Act 2011 (Cth) for ensuring that programs comply with the Provider Course Accreditation Standards. This Schedule provides the detailed principles and criteria that underpin the self-accreditation process for each Masters Degree (Coursework) award that may be delivered and conferred by the University.

(2) This Schedule supports the implementation of the Awards and Graduation Policy and Governance Rule. The Governance Rule describes each type of qualification offered by the University and provides a description of Academic Senate’s role in approving and monitoring programs.

(3) Within the Schedule the general program principles and structures have been tabulated and the approved programs that are offered under it will be listed in Table A - Approved AQF Compliant Programs covered by this Schedule. For the specific descriptions and requirements of an approved program, refer to the program handbook.

(4) In the event of an inconsistency between subordinate policy documents and any Rule(s) or Schedule to the Rule(s), the Rule(s) made by Council prevails to the extent of the inconsistency.

Top of Page

Section 2 - Principles and Program Structures

Model A: Masters Degree (Coursework) (160)

(5) This table describes an AQF level 9 program leading to the award of 160 unit Masters Degree (Coursework) under the Governance Rule.

Volume of Learning The volume of learning required for a Model A - Masters Degree (Coursework) program is typically two years, designed to achieve the specified learning outcomes.
Purpose The Model A - Masters Degree (Coursework) is a program of structured learning with some independent research and project work or practice-related learning. When this degree is offered to prepare graduates for a profession it may include a significant component of core courses at the level of the qualification, to ensure that professional requirements are satisfied.
Maximum Time
Maximum time to complete a Level 9 Masters Degree (Coursework) will be six years from date of admission, calculated on the basis of (2N+2) (Clause 13), inclusive of periods of leave, exclusion or academic suspension.
Approved variations are included in the Appendices - Table A - Approved AQF Compliant Programs covered by this Schedule.
Principles and Structure Graduates of a Masters Degree (Coursework) will have completed a program that:
i) includes an appropriate volume of learning;
ii) has been designed to ensure that the learning outcomes can be met; 
iii) requires the completion of:
   a) at least 80 units at 6000 level;
   b) no more than 60 units at 4000 level; and
   c) no more than 20 units at 3000 level; and
iv) is structured to require the development of: 
   a) research skills through the completion of independent research and/or capstone course courses and/or practice-related learning; and
   b) discipline specific knowledge through the completion of at least 50 units coursework at the level of the qualification.
Individual program requirements will be described in the relevant Program Handbook.
Admission and Selection Criteria
The admission and selection criteria for each program offered under Model A - Masters Degree (Coursework) will be determined by the College and approved by the Program and Course Approval Committee in accordance with the criteria listed below: 

PART A – Admission Criteria and Pathways
 

College admission and selection criteria should specifically address the alternative pathways into the Model A - Masters Degree (Coursework) and maximise the credit that can be granted for formal and non-formal learning already undertaken. This may include pathways provided by approved nested programs and recognised prior learning (please see Credit and Recognition of Prior Learning Policy). 
Without precluding the granting of individual credit, successful applicants to a Masters Degree (Coursework) will typically complete 2 years (160 units) following completion of a Bachelor Degree (different discipline) or equivalent.
 

PART B – General Admission Criteria

College admission and selection criteria must:
i)  be appropriate for this AQF Level and its required learning outcomes;
ii) take into account external benchmarks; 
iii) ensure that successful applicants have:
   a) adequate prior knowledge and skills to complete the program successfully; and
   b) satisfied the admission requirement of having completed an AQF compliant Bachelor Degree (or equivalent) from an Australian institution or recognised overseas institution;
iv) include special admission procedures to support access and equity targets; and
v)  establish English language entry requirements to ensure that students are sufficiently competent in the English language to participate effectively in the program and achieve the required learning outcomes (please see English Language Proficiency Policy).
 

PART C – Additional Admission Criteria

Additional College admission and selection criteria may include requirements for:
i)   prior completion of an approved level 7 or level 8 degree, (recognised under Pathways – nested or integrated qualifications in this table); and/or
ii)  prior completion of such other work as prescribed by the College Board that may be recognised under Pathways – Recognition of Prior Learning (RPL) in this table; and/or
iii) completion of interviews, auditions or portfolios; and/or
iv)  possession of other qualifications, or professional experience, or particular attributes that are required to ensure successful completion. 
Individual program admission requirements will be listed in the relevant Program Handbook.
Specialisation An approved specialisation of a minimum of 80 units identified by the College as from a specific field of study or specialty within a field of study, and excluding any undergraduate courses offered within the program.
Additional Requirements Any approved compulsory program components (CPC) or prerequisites approved by the Program and Course Approval Committee on the recommendation of the relevant College Board.
Graduate Learning Outcomes Graduate learning outcomes underpin the design of all academic programs offered by the University. Graduate learning outcomes will be developed for each program in accordance with Academic Senate policy and as prescribed by AQF including:
i) fundamental skills, such as literacy and numeracy appropriate to the Level 9 Masters Degree (Coursework) including English language proficiency;
ii) people skills, such as working with others and communication skills;
iii) thinking skills, such as learning to learn, decision making and problem solving; and
iv) personal skills such as self direction and acting with integrity.
i Knowledge Graduates of a Masters Degree (Coursework) will have a discipline specific:
i) body of knowledge that includes the understanding of recent developments in a discipline and/or area of professional practice; and
ii) knowledge of research principles and methods applicable to a field of work and/or learning.
ii Skills Graduates of a Masters Degree (Coursework) will have: 
i) cognitive skills to demonstrate mastery of theoretical knowledge and to reflect critically on theory and professional practice or scholarship;
ii) cognitive, technical and creative skills to investigate, analyse and synthesise complex information, problems, concepts and theories and to apply established theories to different bodies of knowledge or practice;
iii) cognitive, technical and creative skills to generate and evaluate complex ideas and concepts at an abstract level;
iv) communication and technical research skills to justify and interpret theoretical propositions, methodologies, conclusions and professional decisions to specialist and non-specialist audiences; and
v) technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice or scholarship.
iii Application of Knowledge and Skills Graduates of a Masters Degree (Coursework) will demonstrate the application of knowledge and skills:
i) with creativity and initiative to new situations in professional practice and/or for further learning;
ii) with high level personal autonomy and accountability; and
iii) to plan and execute a substantial research-based project, capstone course experience and/or piece of scholarship.
Qualification for the Award Completion of a Model A - Masters Degree (Coursework) totalling a volume of learning that is typically equivalent to two years, ensuring that the learning outcomes have been achieved for the level.
Grading of the Award A Model A - Masters Degree (Coursework) program will be conferred as an ordinary degree, or will be conferred 'With Distinction' in cases when a student has:
i) achieved a Grade Point Average of 6.0 or above; and 
ii) completed 50% or more of the degree at the University of Newcastle.
Qualification Title Master of (Field of Study). The qualification title should clearly indicate the field(s) of study or discipline.
Pathways – General The University supports student mobility and the elimination of unfair and unnecessary barriers to our qualifications. Approved entry pathways and admission requirements are described in Admission and Selection Criteria in this table.
Pathways – credit and advanced standing

Credit

Granted in accordance with the AQF Qualifications Pathways Policy to a maximum of 80 units of credit, ensuring that the integrity of the program is preserved, the volume of learning is satisfied and the learning outcomes are achieved. 

Advanced Standing

Advanced standing will be granted to eligible applicants on the basis of formal and non-formal learning completed, depending on the level and the discipline previously completed. Refer to Admission and Selection Criteria, Part A in this table.
Please refer to the Credit and Recognition of Prior Learning Policy.
Pathways – Recognition of Prior Learning (RPL) Recognition of Prior Learning (RPL) is possible for both formal and informal prior learning. RPL may be used for admission purposes or to grant advanced standing. RPL will be evaluated on a case by case basis and must be current and relevant to the program's learning outcomes.
Colleges must provide detailed information on RPL when submitting new or revised programs. Please see Credit and Recognition of Prior Learning Policy.
Pathways – combined degrees A combined degree may be formally approved by the Program and Course Approval Committee (PCAC) and listed in Table A or determined on a case by case application in accordance with the Program Management Manual - Coursework.
Pathways – nested or integrated qualifications
Nested qualifications are qualifications that include articulated arrangements from a lower level qualification to a higher qualification to enable multiple entry and exit points. These are purposely designed qualifications that enable explicit articulation pathways and encompass more than one AQF level and / or qualification type.
A Model A - Masters Degree (Coursework) may be nested with a Masters Degree (Extended) Level 90.
Approved nested qualifications will be listed in Table A of this Schedule.
A Model A – Masters Degree (Coursework) may be integrated with a Graduate Certificate (level 8) or a Graduate Diploma (level 8). 
Approved integrated qualifications will be listed in Table A of this Schedule.
Pathways – Exit An exit award may be available to a student where: 
i) an exit award has been linked to the program in which the student is enrolled; 
ii) the student has satisfactorily completed the program  of study to the point where they are eligible for the approved exit award;
iii) the student is unable to complete the remaining requirements for their original enrolment;
iv) the student has made an application, in writing, to have their enrolment transferred and therefore be awarded an exit award and
v) the relevant College Pro Vice-Chancellor has approved the application.
Approved Exit awards will be noted in Table A of this Schedule.
Pathways - Graduate Graduates of this program may seek admission to Masters Degree (Research) or Doctoral Degree (Research)
Professional Accreditation Model A - Masters Degree (Coursework) may be accredited by professional associations.
Additional Information This section is intentionally blank.

Model B: Masters Degree (Coursework) (120)

(6) This table describes an AQF level 9 program leading to the award of 120 unit Model B - Masters Degree (Coursework) under the Governance Rule.

Volume of Learning The volume of learning required for a Model B - Masters Degree (Coursework) program is typically 1.5 years, designed to achieve the specified learning outcomes.
Purpose The Model B - Masters Degree (Coursework) is a program of structured learning with some independent research and project work or practice-related learning. When this degree is offered to prepare graduates for a profession it may include a significant component of core courses at the level of the qualification, to ensure that professional requirements are satisfied.
Maximum Time Maximum time to complete a Level 9 Masters Degree (Coursework) will be five calendar years from the date of admission, calculated on the basis of (2N+2) (Clause 13), inclusive of periods of leave, exclusion or academic suspension.
Approved variations are included in Table A - Approved AQF Compliant Programs covered by this Schedule.
Principles and Structure
Graduates of a Model B - Masters Degree (Coursework) will have completed a program  that:
i)   includes an appropriate volume of learning;
ii)  has been designed to ensure that the learning outcomes can be met; 
iii) requires the completion of:
   a) at least 80 units at 6000 level; and
   b) no more than 40 units at 4000 level; and
iv)  is structured to require the development of: 
   a) research skills through the completion of independent research and/or capstone course courses and/or practice-related learning; and
   b) discipline specific knowledge through the completion of at least 50 units at the 6000 level.

Individual program requirements will be described in the relevant Program Handbook.
Admission and Selection Criteria
The admission and selection criteria for each program will be determined by the College and approved by the Program and Course Approval Committee in accordance with the criteria listed below: 

PART A – Admission Criteria and Pathways

College admission and selection criteria should specifically address the alternative pathways into the Model B - Masters Degree (Coursework) and maximise the credit that can be granted for formal and non-formal learning already undertaken. This may include pathways provided by approved nested programs and recognised prior learning. 
Without precluding the granting of individual credit, successful applicants to a Model B - Masters Degree (Coursework) will typically complete:
i) 1.5 years (or 120 units) following completion of either:
   a. Bachelor Degree (same discipline); or
   b. Bachelor Honours Degree (different discipline); or
   c. Graduate Diploma (different discipline); or
   d. Graduate Certificate (different discipline).
 

PART B – General Admission Criteria

College admission and selection criteria must:
i)   be appropriate for this AQF Level and its required learning outcomes;
ii)  take into account external benchmarks; 
iii) ensure that successful applicants have:
     a) adequate prior knowledge and skills to complete the program successfully; and
     b) satisfied the admission requirement of having completed an AQF compliant Bachelor degree (or equivalent) from an Australian institution or recognised overseas institution;
iv)  include special admission procedures to support access and equity targets; and
v)   establish English language entry requirements to ensure that students are sufficiently competent in the English language to participate effectively in the program and achieve the required learning outcomes (Please see English Language Proficiency Policy).
 

PART C – Additional Admission Criteria

Additional College admission and selection criteria may include requirements for:
i) prior completion of an approved level 7 or level 8 degree, recognised in Pathways – Nested or Integrated Qualifications in this table; and/or
ii) prior completion of such other work as prescribed by the College Board that may be recognised under Pathways – Recognition of Prior Learning (RPL) in this table; and/or
iii) completion of interviews, auditions or portfolios; and/or
iv) possession of other qualifications, or professional experience, or particular attributes that are required to ensure successful completion. 
Individual program admission requirements will be listed in the program handbook.
 
Specialisation An approved specialisation of a minimum of 60 units identified by the College as from a specific field of study or specialty within a field of study.
Additional Requirements Any approved compulsory program components (CPC) or prerequisites approved by the Program and Course Approval Committee on the recommendation of the relevant College Board.
Graduate Learning Outcomes Graduate learning outcomes underpin the design of all academic programs offered by the University. Graduate learning outcomes will be developed for each program in accordance with the AQF including:
i)   fundamental skills, such as literacy and numeracy appropriate to the Level 9 Masters Degree (Coursework) including English language proficiency;
ii)  people skills, such as working with others and communication skills;
iii) thinking skills, such as learning to learn, decision making and problem solving; and
iv)  personal skills such as self direction and acting with integrity.
i Knowledge Graduates of a Masters Degree (Coursework) will have:
i)  body of knowledge that includes the understanding of recent developments in a discipline and/or area of professional practice; and
ii) knowledge of research principles and methods applicable to a field of work or learning.
ii Skills Graduates of a Masters Degree (Coursework) will have discipline specific: 
i)   cognitive skills to demonstrate mastery of theoretical knowledge and to reflect critically on theory and professional practice or scholarship;
ii)  cognitive, technical and creative skills to investigate, analyse and synthesise complex information, problems, concepts and theories and to apply established theories to different bodies of knowledge or practice;
iii) cognitive, technical and creative skills to generate and evaluate complex ideas and concepts at an abstract level;
iv)  communication and technical research skills to justify and interpret theoretical propositions, methodologies, conclusions and professional decisions to specialist and non-specialist audiences; and
v)   technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice or scholarship.
iii Application of Knowledge and Skills Graduates of a Masters Degree (Coursework) will demonstrate the application of knowledge and skills:
i) with creativity and initiative to new situations in professional practice and/or for further learning;
ii) with high level personal autonomy and accountability; and
iii) to plan and execute a substantial research-based project, capstone course experience and/or piece of scholarship.
Qualification for the Award Completion of a Model B - Masters Degree (Coursework) totalling a volume of learning that is typically equivalent to 1.5 years, ensuring that the learning outcomes have been achieved for the level.
Grading of the Award A Model B - Masters Degree (Coursework) program will be conferred as an ordinary degree, or will be conferred 'With Distinction' in cases when a student has:
i) achieved a Grade Point Average of 6.0 or above; and 
ii) completed 50% or more of the degree at the University of Newcastle.
Qualification Title Master of (Field of Study). The qualification title should clearly indicate the field(s) of study or discipline.
Pathways – General The University supports student mobility and the elimination of unfair and unnecessary barriers to our qualifications. Approved entry pathways and admission requirements are described in Admission and Selection Criteria in this table.
Pathways – Credit and Advanced Standing
Credit
Granted in accordance with the AQF Qualifications Pathways Policy to a maximum of 60 units of credit, ensuring that the integrity of the program is preserved, the volume of learning is satisfied and the learning outcomes are achieved.
Advanced Standing
Advanced standing will be granted to eligible applicants on the basis of formal and non-formal learning completed, depending on the level and the discipline previously completed. Refer to Admission and Selection Criteria, Part A in this table.
Please refer to the Credit and Recognition of Prior Learning Policy.
Pathways – Recognition of Prior Learning (RPL) Recognition of Prior Learning (RPL) is possible for both formal and informal prior learning. RPL may be used for admission purposes or to grant advanced standing. RPL will be evaluated on a case by case basis and must be current and relevant to the program's learning outcomes.
Colleges must provide detailed information on RPL when submitting new or revised programs. 
Pathways – combined degrees A combined degree may be formally approved by the Program and Course Approval Committee (PCAC) and listed in Table A or determined on a case by case application in accordance with the Program Management Manual - Coursework.
Pathways – nested or integrated qualifications
Nested qualifications are qualifications that include articulated arrangements from a lower level qualification to a higher qualification to enable multiple entry and exit points. These are purposely designed qualifications that enable explicit articulation pathways and encompass more than one AQF level and / or qualification type.
A Model B - Masters Degree (Coursework) may be nested with the following qualifications:
- Masters Degree (Extended) (level 9).
Approved nested qualifications will be listed in Table A of this Schedule.
A Model B – Masters Degree (Coursework) may be integrated with a Graduate certificate (level 8) or a Graduate Diploma (level 8). Approved integrated qualifications will be listed in Table A of this Schedule.
Pathways – Exit An exit award may be available to a student where: 
i) an exit award has been linked to the program in which the student is enrolled; 
ii) the student has satisfactorily completed the program of study to the point where they are eligible for the approved exit award;
iii) the student is unable to complete the remaining requirements for their original enrolment;
iv) the student has made an application, in writing, to have their enrolment transferred and therefore be awarded an exit award and
v) the relevant College Pro Vice-Chancellor has approved the application.
Approved Exit awards will be noted in Table A of this Schedule.
Pathways - Graduate Graduates of this program may seek admission to Masters Degree (Research) or Doctoral Degree (Research)
Professional Accreditation Model B - Masters Degree (Coursework) may be accredited by professional associations.
Additional Information This section is intentionally blank.

Model C: Masters Degree (Coursework) (80)

(7) This table describes an AQF level 9 program leading to the award of 80 unit Model C - Masters Degree (Coursework) under the Governance Rule.

Volume of Learning The volume of learning required for a Model C - Masters Degree (Coursework) program is typically one year, designed to achieve the specified learning outcomes.
Purpose The Model C - Masters Degree (Coursework) is a program of structured learning with some independent research and project work or practice-related learning. When this degree is offered to prepare graduates for a profession it may include a significant component of core courses at the level of the qualification, to ensure that professional requirements are satisfied.
Maximum Time Maximum time to complete a Level 9 Masters Degree (Coursework) will be four years from the date of admission, calculated on the basis of (2N+2) (Clause 13), inclusive of periods of leave, exclusion or academic suspension.
Approved variations are included in Table A - Approved AQF Compliant Programs covered by this Schedule.
Principles and Structure Graduates of a Model C - Masters Degree (Coursework) will have completed a program that:
i)   includes an appropriate volume of learning;
ii)  has been designed to ensure that the learning outcomes can be met; 
iii) requires the completion of at least 80 units at 6000 level; and
iv)  is structured to require the development of: 
   a) research skills through the completion of independent research and/or capstone course courses and/or practice-related learning; and
   b) discipline specific knowledge through the completion of at least 50 units at the 6000 level.
Individual program requirements will be described in the program handbook.
Admission and Selection Criteria

The admission and selection criteria for each program will be determined by the College and approved by the Program and Course Approval Committee in accordance with the criteria listed below: 

PART A – Admission Criteria and Pathways

College admission and selection criteria should specifically address the alternative pathways into the Model C - Masters Degree (Coursework) and maximise the credit that can be granted for formal and non-formal learning already undertaken. This may include pathways provided by approved nested programs and recognised prior learning. 
Without precluding the granting of individual credit, successful applicants to a Model C - Masters Degree (Coursework) will typically complete 1 year (or 80 units) following completion of an AQF level 8 Bachelor Honours Degree (same discipline).
 
 

PART B – General Admission Criteria

College admission and selection criteria must:
i)   be appropriate for this AQF Level and its required learning outcomes;
ii)  take into account external benchmarks; 
iii) ensure that successful applicants have:
   a) adequate prior knowledge and skills to complete the program successfully; and
   b) satisfied the admission requirement of having completed an AQF compliant Bachelor degree (or equivalent) from an Australian institution or recognised overseas institution;
iv)  include special admission procedures to support access and equity targets; and
v)   establish English language entry requirements to ensure that students are sufficiently competent in the English language to participate effectively in the program and achieve the required learning outcomes (PLease see English Language Proficiency Policy).
 

PART C – Additional Admission Criteria

Additional College admission and selection criteria may include requirements for:
i)   prior completion of an approved level 8 degree, (recognised in Pathways – nested or integrated qualifications, in this table); and/or
ii)  prior completion of such other work as prescribed by the College Board that may be recognised in Pathways – Recognition of Prior Learning (RPL) in this table; and/or
iii) completion of interviews, auditions or portfolios; and/or
iv)  possession of other qualifications, or professional experience, or particular attributes that are required to ensure successful completion. 
Individual program admission requirements will be listed in the relevant Program Handbook.
Specialisation An approved specialisation of a minimum of 40 units identified by the College as from a specific field of study or specialty within a field of study.
Additional Requirements Any approved compulsory program components (CPC) or prerequisites approved by the Program and Course Approval Committee on the recommendation of the relevant College Board.
Graduate Learning Outcomes Graduate learning outcomes underpin the design of all academic programs offered by the University. Graduate learning outcomes will be developed for each program in accordance with Academic Senate policy and as prescribed by AQF including:
i) fundamental skills, such as literacy and numeracy appropriate to the Level 9 Masters Degree (Coursework) including English language proficiency;
ii) people skills, such as working with others and communication skills;
iii) thinking skills, such as learning to learn, decision making and problem solving; and
iv) personal skills such as self direction and acting with integrity.
i Knowledge Graduates of a Masters Degree (Coursework) will have:
i)  body of knowledge that includes the understanding of recent developments in a discipline and/or area of professional practice; and
ii) knowledge of research principles and methods applicable to a field of work and/or learning.
ii Skills Graduates of a Masters Degree (Coursework) will have discipline specific: 
i)  cognitive skills to demonstrate mastery of theoretical knowledge and to reflect critically on theory and professional practice or scholarship;
ii) cognitive, technical and creative skills to investigate, analyse and synthesise complex information, problems, concepts and theories and to apply established theories to different bodies of knowledge or practice;
iii) cognitive, technical and creative skills to generate and evaluate complex ideas and concepts at an abstract level;
iv)  communication and technical research skills to justify and interpret theoretical propositions, methodologies, conclusions and professional decisions to specialist and non-specialist audiences; and
v)   technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice or scholarship.
iii Application of Knowledge and Skills Graduates of a Masters Degree (Coursework) will demonstrate the application of knowledge and skills:
i)   with creativity and initiative to new situations in professional practice and/or for further learning;
ii)  with high level personal autonomy and accountability; and
iii) to plan and execute a substantial research-based project, capstone course experience and/or piece of scholarship.
Qualification for the Award Completion of a Model C - Masters Degree (Coursework) totalling a volume of learning that is typically equivalent to one year, ensuring that the learning outcomes have been achieved for the level.
Grading of the Award  A Model C - Masters Degree (Coursework) program will be conferred as an ordinary degree, or will be conferred 'With Distinction' in cases when a student has:
i)  achieved a Grade Point Average of 6.0 or above; and 
ii) completed 50% or more of the degree at the University of Newcastle.
Qualification Title Master of (Field of Study). The qualification title should clearly indicate the field(s) of study or discipline.
Pathways – General The University supports student mobility and the elimination of unfair and unnecessary barriers to our qualifications. Approved entry pathways and admission requirements are described in Admission and Selection Criteria in this table.
Pathways – Credit and Advanced Standing

Credit

Granted in accordance with the AQF Qualifications Pathways Policy to a maximum of 40 units of credit, ensuring that the integrity of the program is preserved, the volume of learning is satisfied and the learning outcomes are achieved.

Advanced Standing

Advanced standing will be granted to eligible applicants on the basis of formal and non-formal learning completed, depending on the level and the discipline previously completed. Refer to Admission and Selection Criteria, Part A in this table.
Please see Credit and Recognition of Prior Learning Policy.
Pathways – Recognition of Prior Learning (RPL) Recognition of Prior Learning (RPL) is possible for both formal and informal prior learning. RPL may be used for admission purposes or to grant advanced standing. RPL will be evaluated on a case by case basis and must be current and relevant to the program's learning outcomes.
Colleges must provide detailed information on RPL when submitting new or revised programs. 
Pathways – combined degrees A combined degree may be formally approved by the Program and Course Approval Committee (PCAC) and listed in Table A or determined on a case by case application in accordance with the Program Management Manual - Coursework.
Pathways – nested or integrated qualifications
Nested qualifications are qualifications that include articulated arrangements from a lower level qualification to a higher qualification to enable multiple entry and exit points. These are purposely designed qualifications that enable explicit articulation pathways and encompass more than one AQF level and / or qualification type.
A Model C - Masters Degree (Coursework) may be nested with a Masters Degree (Extended) (level 9).
Approved nested qualifications will be listed in Table A of this Schedule.
A Model C – Masters Degree (Coursework) may be integrated with a Graduate Certificate (level 8). Approved integrated qualifications will be listed in Table A of this Schedule.
Pathways – Exit An exit award may be available to a student where: 
i) an exit award has been linked to the program in which the student is enrolled; 
ii) the student has satisfactorily completed the program  of study to the point where they are eligible for the approved exit award;
iii) the student is unable to complete the remaining requirements for their original enrolment;
iv) the student has made an application, in writing, to have their enrolment transferred and therefore be awarded an exit award and
v) the relevant College Pro Vice-Chancellor has approved the application.
Approved Exit awards will be noted in Table A of this Schedule.
Pathways - Graduate Graduates of this program may seek admission to Masters Degree (Research) or Doctoral Degree (Research)
Professional Accreditation Model C - Masters Degree (Coursework) may be accredited by professional associations.
Additional Information This section is intentionally blank.
Top of Page

Section 3 - Notes

Other Information about Programs – may be added here.

(8) Decisions regarding the volume of learning and design of qualifications must take into account the likelihood of a student’s success and ensure that the integrity of the learning outcomes are maintained.

(9) Advanced standing may be granted towards the volume of learning required to complete the Masters Degree (Coursework) when there is a pedagogical rationale to justify the decision.

(10) If the minimum volume of learning is allocated to a qualification, the components of the program of learning must be predominately or entirely at the level of the qualification type.

(11) If credit, e.g. through articulation arrangements, contributes to the volume of learning the learning outcomes for the qualification must be achievable despite the reduced volume of learning.

(12) The concept of ‘typically’, as used to describe the volume of learning, is not intended as a justification for not applying the requirements described in this Schedule.

(13) 2N+2 where N is equal to the notional duration identified by the volume of learning.

(14) The volume of learning may include approved nested Graduate Certificates or Graduate Diplomas or advanced standing granted in recognition of previously completed formal and/or non-formal learning.

(15) RPL may be a requirement for admission. RPL may also be used to grant advanced standing in the 160 and 120 unit Masters only, ensuring that learning outcomes are met and discipline requirements are preserved. The RPL requirement would usually be explicitly described in admission criteria, e.g. 5 years professional experience in the XYX Field of Study or a discipline.

Top of Page

Section 4 - Relaxing Provision

(16) To provide for exceptional circumstances arising in any particular case, the President of Academic Senate, on the recommendation of the relevant Deputy Vice-Chancellor or relevant College Pro Vice-Chancellor may relax any provision of this Schedule.

Top of Page

Section 5 - Reporting

(17) The President of the Academic Senate will report all applications of the relaxing provision of this Schedule to the Academic Senate.